Commercial Kitchen Equipment & Turnkey Project Engineering
Factory Product

Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet

Commercial dutyFactory configurationExport documentation

Commercial Cleanroom Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet (HSYL-GY-XD01 / XD02): B2B Engineering Overview

The Commercial Cleanroom Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet (HSYL-GY-XD) is an industrial-grade sterilization solution engineered for high-throughput hotels, central kitchens, and institutional catering across the Middle East (GCC) and Southeast Asia. 360° circulating hot air reaches 125°C to eliminate pathogenic bacteria and viruses with microcomputer timing control. Fabricated with AISI 304 / anti-fingerprint brushed stainless steel chamber, 45mm–50mm high-density polyurethane/rock-wool insulation & 6mm solid SUS304 racks, it delivers verified operational output (1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying) under 220V–240V / 1Ph / 50–60Hz (380V on high-power models) supply and complies with IEC 60335-2-58 / GB 17988 (2-Star Escherichia coli & Poliovirus Inactivation), HACCP Sanitation Standard, CE.

253.7nm UV-C Germicidal, Ozone & Warm-Air Drying Sterilization

  • 253.7nm Quartz UV-C Lamp Array + Ozone + 55°C–75°C Condensation-Free Drying (1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying): Sanitizes chef knives, color-coded PE chopping boards, chainmail gloves, cleanroom uniforms, and boots without dulling tempered blade edges or shrinking fabrics.
  • 45mm–50mm High-Density Thermal Insulation & Silicone Magnetic Gasket: Locks thermal energy inside the cavity so outer cabinet walls remain below 45°C even during peak 125°C–150°C sterilization cycles.
  • Heavy-Load 6mm Solid SUS304 Wire Shelving / Custom Knife & Garment Racks: Supports 35–50 kg per shelf without sagging under heavy ceramic banquet plates or GN pans.
  • Microcomputer LED Cycle Timer & Door-Open Safety Interlock: Automatically cuts UV-C, ozone, and heating elements the instant a door is opened during operation. Factory baseline configuration for HSYL-GY-XD01 / XD02: Flat-Door Type-A Digital Hot-Air Circulation Sterilizer.

HACCP Pathogenic Inactivation & 1.80 kWh/Day Sterilization TCO

In humid Southeast Asian and GCC institutional kitchens, damp tableware stored on open shelves rapidly breeds mold and coliform bacteria. Running two 60-to-90-minute sanitization and drying cycles per day on the HSYL-GY-XD01 / XD02 consumes approximately 1.80 kWh/day, keeping sanitized tableware, knives, or cleanroom garments in a sealed, positive-pressure sterile environment for 24 hours. Long-life heating tubes (>8,000h) and plug-in digital PCBs ensure minimal maintenance cost. Configured specifically as a Commercial Cleanroom Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet (1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying), this unit integrates directly into standardized commercial sterilization lines with full factory spare-parts traceability.

Technical Specification Sheet & Sub-SKU Matrix

Specification Value
IDENTITY
Model / Series CodeHSYL-GY-XD01 / XD02
Equipment DesignationCommercial Cleanroom Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet (HSYL-GY-XD)
PERFORMANCE & ELECTRICAL
Core Engineering Specs1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying
Power Supply / Energy Source220V–240V / 1Ph / 50–60Hz (380V on high-power models)
CONSTRUCTION & COMPLIANCE
Structural Material GradeAISI 304 / anti-fingerprint brushed stainless steel chamber, 45mm–50mm high-density polyurethane/rock-wool insulation & 6mm solid SUS304 racks
Compliance & Design StandardsIEC 60335-2-58 / GB 17988 (2-Star Escherichia coli & Poliovirus Inactivation), HACCP Sanitation Standard, CE
Sub-SKU Configuration Matrix (RTP-3361-Door / RTD-7202-Door):
ModelCart Body ConfigDimensions (mm)Energy SourceSteam PressureTray CapacityNet Weight
HSYL-GY-011-TrolleySteaming Room1100*1200*2050Direct Boiler Steam / Electric Auxiliary0.02 - 0.05 MPa24 / 36 TraysPerforated S/S Steaming Trays260 kg
HSYL-GY-022-TrolleySteaming Room1950*1200*2050Direct Boiler Steam / Electric Auxiliary0.02 - 0.05 MPa48 / 72 TraysPerforated S/S Steaming Trays430 kg
FAQ

Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet Questions

What tableware or tool materials are compatible with the HSYL-GY-XD01 / XD02 sterilization temperature?

The HSYL-GY-XD01 / XD02 is built specifically for cleanroom chef uniforms, aprons, caps, and rubber boots using UV-C, ozone, and gentle warm-air drying (1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying).

How is daily energy consumption (1.80 kWh/day) calculated for the HSYL-GY-XD01 / XD02?

Each automated cycle heats to target temperature and holds for 45–60 minutes before entering insulated thermal retention, drawing roughly 0.90 kWh per cycle thanks to the 45mm–50mm foamed/rock-wool insulation barrier.

What installation and spare parts details should be confirmed before ordering the HSYL-GY-XD01 / XD02?

Confirm unit dimensions (1-Door: 650×580×1850mm (800W) | 2-Door: 1200×580×1850mm (1500W) | Built-In Garment Hanging Rail + Boot Rack + Medium-Temp Drying) against your dishroom doorway width (or request Knock-Down panel delivery on XDF walk-in rooms), verify 220V/1Ph vs. 380V/3Ph power, and include spare heating tubes, UV lamps, and door gaskets.

Related Technical Guides

Planning & Selection Resources

Explore engineering sizing guidelines, capacity benchmarks and operational workflows for Workwear, Chef Uniform & Boot UV/Ozone Disinfection Cabinet.

Project Enquiry

Plan Your Kitchen with an Engineering Team

Send your menu, meal volume, floor plan and utility conditions. We will identify the equipment logic, layout questions and technical data required before quotation.

Start Technical Discussion