Commercial Induction Stockpot Soup Stove

Commercial Induction Stockpot Soup Stove (HSYL-DC-TL01 / TL02 / TL03): B2B Engineering Overview

The Commercial Induction Stockpot Soup Stove (HSYL-DC-TL01 / TL02 / TL03) is an industrial-grade induction cooking solution engineered for high-throughput hotels, central kitchens, and institutional catering across the Middle East (GCC) and Southeast Asia. Ultra-low platform height for effortless handling of heavy soup barrels, with high backsplash and 9-stage simmering control. Fabricated with AISI 304 1.5mm low-profile load-bearing deck (500mm deck height + 700mm backsplash) rated for >=200 kg per burner, it delivers verified operational output (TL01: 650-900×750-950×500+700mm (12-30kW)TL02: 1300-1600×800-900×500+700mm (12-30kW×2)) under 380V–415V / 3Ph+N+PE / 50–60Hz supply and complies with IEC 60335-2-36, NSF/ANSI 4, CE, SASO.

Ergonomic 500mm Low-Deck & 200 kg Stockpot Load Engineering

• Ergonomic 500mm Low-Deck Height for 100L–250L Stockpots (TL01: 650-900×750-950×500+700mm (12-30kW)TL02: 1300-1600×800-900×500+700mm (12-30kW×2)): Lowered 500mm cooking deck eliminates dangerous chest-high lifting of boiling soup barrels, while the reinforced internal frame supports over 200 kg static load per burner zone.
• 500mm×500mm Heavy-Duty Flat Microcrystalline Glass-Ceramic Plate: 6mm compression-resistant flat glass-ceramic plate transfers 93% electromagnetic energy directly into thick-bottomed stainless steel soup barrels.
• High-Back 700mm Splash Guard with Swivel Water Fill Faucet: Integrated deck/backsplash swivel faucet fills 150L stockpots directly on the stove without manual bucket carrying, reducing kitchen slip hazards.
• Continuous 24-Hour Broth Simmering Stability: Industrial Infineon IGBT module with dual-duct forced air cooling maintains steady low-wattage simmering for 8–12 hour ramen, pho, and halal bone-broth extraction without thermal tripping. Factory baseline configuration for HSYL-DC-TL01 / TL02 / TL03: Dimensions: 650*800*(550+650) mm; Specifications: 15kW / 380V; Technical Standard: Premium SUS201 S/S, 1.2mm Top Panel, 0.8mm Side Panels; Configuration: 428mm Glass-Ceramic Plate with 50# Heavy S/S Soup Barrel.

Bone Broth Simmering Efficiency & 288.0 kWh/Day TCO Analysis

Long-hour soup and stock extraction is one of the highest energy consumers in Asian and hotel kitchens. By replacing open-flame gas stockpot stoves (which waste 60% of heat up the exhaust hood) with the HSYL-DC-TL01 / TL02 / TL03, kitchens cut broth simmering energy costs by 50%+. Over an 8-hour shift (rapid boil followed by low-power simmering, ~60% weighted duty factor), daily energy consumption averages 288.0 kWh/day while keeping floor-level noise under 58 dBA. Configured specifically as a Commercial Induction Stockpot Soup Stove (TL01: 650-900×750-950×500+700mm (12-30kW)TL02: 1300-1600×800-900×500+700mm (12-30kW×2)), this unit integrates directly into standardized commercial induction cooking lines with full factory spare-parts traceability.

Technical Specification Sheet & Sub-SKU Matrix