Heavy Duty Kitchen Equipment
Heavy duty commercial kitchen equipment: 6–24 tray steamer cabinets, 80 L to 500 L tilting kettles, 2- and 3-tier worktables and conveyor dishwashers.
Heavy-duty kitchen equipment should suit the frequency and intensity of the intended task. A long preparation shift creates different demands from a short peak at service. From compact countertop stations to heavy-duty floor-standing lines, matching your heavy duty kitchen equipment configuration to your menu workflow keeps service fast, organized, and consistent.
Compare Heavy Duty Kitchen Equipment Models & Specifications
| Model & Series | Dimensions & Capacity | Power / Fuel Supply | Recommended Kitchen Use |
|---|---|---|---|
| HSO / SZXT Series (6, 8, 10, 12 & 24-Tray Single/Double-Door) | Single-door: 720×640×1000–1550 mm (6–12 trays); Double-door: 1430×640×1550 mm (24 trays); 400×600×50 mm SUS304 pans | Electric: 9 kW / 12 kW / 24 kW (220V / 380V); Gas: NG 2000 Pa or LPG 2800 Pa (1.1–3.6 m³/h) | High-volume batch steaming of rice, proteins, vegetables, and buns in canteens, hotels, and central kitchens |
| HIG80G / HTG80G (80L Gas), HTG80E (80L Electric) & TBP-100L / 200L / 300L / 500L Tilting Kettles | Modular 80L: 800×700/900×920 mm (75 kg); Industrial hemispherical: 100L, 200L, 300L, 400L & 500L capacities | Gas: 10.0–35.0 kW (NG / LPG); Electric thermal-oil / steam-jacketed: 9.0 kW to 45.0 kW (380V 3-Phase) | Simmering bone broths, soups, curries, sauces, congee, and braising large batches in central kitchens |
| HSYL-BG-GZ01 (2-Tier Single Undershelf) & HSYL-BG-GZ02 (3-Tier Double Undershelf) | Lengths: 800 / 1000 / 1200 / 1500 / 1800 / 2000 mm; Depths: 600 / 700 / 800 mm; Height: 800 mm (+100 mm optional upstand) | 0.8 / 1.0 / 1.2 / 1.5 mm brushed SUS304 stainless steel; >300 kg uniform static load capacity | General food prep, chopping boards, mixer/slicer placement, and plating islands across any commercial kitchen |
| HDW180 / HDW260 (Rack Conveyor), HDW2000DL-ER (with Dryer) & HDW3000 / 5000L / 8000L (Flight Tunnel) | Rack conveyor: 1667–2750×810×1520 mm (220–260 racks/h); Flight tunnel: 3800–7800×900×1700 mm (3000–8000 dishes/h) | 380V/50Hz 3-Phase (42 kW / 48 kW / 54 kW rack conveyor; 52 kW / 82 kW / 115 kW flight tunnel) or Steam-heated | University dining halls, hospitals, airline catering, factory canteens, and large hotel banquet halls |
| HBG60G (900-Series 60L Gas Tilting Bratt Pan) & HBG60E (60L Electric Tilting Bratt Pan) | 800×900×920 mm (60-liter rectangular pan capacity; 110 kg net weight); 0° to 90° manual worm-gear tilt | Gas HBG60G: 18.0 kW (NG 2000 Pa / LPG 2800 Pa); Electric HBG60E: 10.5 kW (380V / 50Hz); Temp: 50–300°C | Braising meats, shallow-frying cutlets, sautéing vegetables, simmering stews, and cooking curries/rice in bulk |
| HSYL-240 (1-Trolley 24-Tray), HSYL-360 (36-Tray), HSYL-480 (2-Trolley 48-Tray), HSYL-TC-24G/48G & HSYL-GY-01/02 | 1050×1150×2000 mm (24 trays), 1450×1150×2000 mm (36 trays), 1880×1150×2000 mm (48 trays); Trolley: 650×750×1650 mm | Electric: 24 kW / 36 kW / 48 kW (380V); Gas: 3.5–6.8 m³/h NG or 2.2–4.2 kg/h LPG; Direct Steam: 0.02–0.05 MPa | Central kitchens, food processing plants, large school/factory canteens, and banquet production (500–2000+ meals) |
Explore Matching Heavy Duty Kitchen Equipment Configurations

HSO Series Gas & Electric Steamer Cabinets (6–24 Trays)
Heavy-duty upright steaming cabinets built in food-grade SUS304 stainless steel for continuous tray-based batch production. Available in single-door (6 to 12 trays) and double-door (24 trays) formats with both electric immersion boilers and energy-saving gas burners.
Automatic float/solenoid water refill, dry-boil cutoff protection, and 30 mm high-density foam insulation keep steam output steady throughout peak service.

80L Modular & 100L–500L Industrial Tilting Jacketed Boiling Kettles
Double-walled jacketed boiling pans and hemispherical tilting kettles that heat the inner SUS304/316 pot uniformly across 360 degrees via a pressurized steam or thermal-oil jacket.
Eliminates localized hot spots and bottom burning on thick sauces and porridges, with smooth handwheel worm-gear tilting up to 90° for effortless pouring.

Heavy-Duty 2-Tier & 3-Tier Stainless-Steel Kitchen Worktables
Full-welded or knock-down commercial worktables built with sound-deadened hat-channel reinforced tops, triple-hemmed safety edges, Φ38 mm tubular legs, and adjustable stainless bullet feet.
Supports over 300 kg of heavy countertop appliances and bulk ingredients without flexing, rusting, or harboring bacteria.

Rack Conveyor & Flight-Type Tunnel Commercial Dishwashers
Continuous automated warewashing lines featuring multi-stage pre-wash, power wash, dual-rinse sanitization, and integrated high-velocity hot-air drying tunnels in left-to-right or right-to-left flows.
Handles thousands of plates and trays per hour with minimal labor while heat-recovery condensers cut steam emissions and power bills.

HBG60G (Gas) & HBG60E (Electric) 60L Commercial Tilting Bratt Pans
Heavy-duty 900-Series 60-liter tilting skillet (bratt pan) with a thick compound stainless steel pan floor, spring-balanced hinged lid, integrated water-fill spout, and handwheel tilting gear.
One machine handles searing, braising, shallow-frying, and boiling—then tilts smoothly up to 90 degrees to pour finished food directly into Gastronorm pans.

24-Tray, 36-Tray & 48-Tray Roll-In Trolley Steaming Rooms
Floor-level walk-in/roll-in steaming rooms engineered for wheeled SUS304 mobile tray racks. Available in electric, gas, and direct municipal/boiler steam-inlet configurations.
Operators wheel a fully loaded 24-tray or 36-tray trolley straight from the prep table into the steamer via the floor ramp—eliminating manual tray-by-tray loading.
Heavy-duty equipment for the actual work pattern
Construction, controls, access and routine cleaning all affect daily usability. A heavier appliance is not automatically the better fit. The useful choice is equipment whose intended duty matches the kitchen's real operating pattern and whose surrounding station supports it.
Heavy-duty kitchen equipment should be assessed against the actual load and frequency of use. A sturdy appearance or thick-looking panel cannot establish a supported duty rating. Compare documented construction and operating limits with the food, containers and handling conditions expected in the kitchen.
How to Choose the Right Heavy Duty Kitchen Equipment for Your Kitchen
- HACCP Flow & Zero Cross-Contamination: Design linear forward-flowing movement from raw delivery receiving, through chilled storage and prep stations, to the hot cookline and pass counter without return cross-traffic.
- Modular Alignment (600 / 700 / 900 Series): Unifying appliance depth across the hot line creates a seamless continuous cooking block, eliminating dirt-trapping gaps and simplifying overhead exhaust canopy sizing.
- Ergonomic Chef Hand-offs: Maintain a minimum 1050 mm to 1200 mm gangway between the hot cookline and rear preparation tables to permit safe two-way brigade movement with hot cookware.
Size has to serve the food process
Large or heavy-duty equipment can be useful when the food and working period call for it. The appropriate vessel, chamber or cabinet depends on the product and how it is handled. A large kettle and a large oven serve different processes. Neither a heavy body nor a broad industrial label establishes a particular production rate or suitability for every menu.
Loading and discharge connect the stages
Ingredients need to reach the appliance, and finished food needs a practical receiving position. Large batches make these interfaces more visible. A vessel that cooks efficiently can still be inconvenient to empty, while a chamber can wait for trays if preparation is slow. The useful equipment group fits the complete sequence, including routine access and the time between loads. The appliance's loading points and receiving position become important as batches grow. A vessel may need clear access for discharge, while a cabinet needs a practical route for its containers. Size is useful when those movements remain manageable.
Pre-Installation & Kitchen Planning Guide: Heavy Duty Kitchen Equipment
| Planning Factor | What to Prepare in Your Kitchen |
|---|---|
| Total Electrical & Gas Peak Demand | Calculate total simultaneous connected load factoring diversity coefficients (typically 0.70 to 0.80) to size the kitchen main switchboard and gas meter. |
| Fresh Air Makeup & Exhaust Balance | Kitchen ventilation must balance 85-90% makeup air against exhaust volume to maintain slight negative pressure, preventing cooking smells from escaping into dining areas. |
| Floor Gully Slope & Grease Interceptors | Ensure stainless steel drainage channels with sediment baskets and anti-slip grating are situated parallel to prep and wash lines with 1:100 floor slopes. |
| Health & Fire Safety Clearances | Maintain minimum 150 mm clearances to combustible walls, and ensure all cooking blocks are covered by automated wet-chemical fire suppression systems. |
Further Reading & Kitchen Planning Resources
Get a Quote or Custom Layout for Your Heavy Duty Kitchen Equipment
Tell our team what you plan to prepare, your target meal volume, and your available kitchen space. HSYL provides factory-direct pricing, custom SUS304 stainless steel fabrication, and complete kitchen equipment solutions tailored to your local voltage and gas standards.
Request Pricing & Product Specifications from HSYL
Related Kitchen Products
Selected from the catalogue against the keywords of this page, then reviewed with your duty cycle, utilities and site conditions before quotation.
Engineering-Led Commercial Kitchen Manufacturing
HSYL Kitchen Systems designs and produces heavy-duty commercial kitchen equipment for central kitchens, hotels, canteens, hospitals and high-capacity restaurants. Our goal is to provide precise equipment matching, documented quality gates and verified delivery for global foodservice operations.
- Food-grade SUS304 & SUS316 stainless steel construction
- Custom engineering layout & CAD drawing support
- Multi-stage factory quality control & FAT testing
- Factory-direct supply chain with spare parts backup

Advanced OEM Processing Equipment & Lines
Equipped with world-class automated sheet metal processing, precision bending centers, thermal foaming lines, and vacuum test rigs to support high-volume commercial kitchen OEM/ODM manufacturing.
Italian Salvagnini Panel Bending Center
Automated sheet metal bending system for seamless cabinet fabrication and tight structural tolerances.
Automated Bending & Laser Cutting Line
Integrated flexible processing line combining fiber laser cutting and multi-axis CNC bending.
Constant-Temperature Foaming Line
Continuous polyurethane thermal insulation foaming line ensuring uniform core density.
Vacuum Extraction & Testing Line
High-vacuum circuit evacuation and automated leak detection for commercial cooling systems.
Laser Cutting & CNC Punching Station
High-speed fiber laser cutting and precision CNC punching for intricate component fabrication.
Canadian Heavy-Duty CNC Press Brake
High-tonnage precision press brake for large-format stainless steel sheet forming.
Material Shearing & Cutting Line
Automated heavy-gauge stainless steel shearing and precision raw material sizing.
Material Film Laminating Line
Automated surface protection film application to preserve satin and mirror metal finishes.
Explore Popular Kitchen Equipment
Browse equipment that visitors frequently explore, then review the exact model and specifications for your project.
Stainless Steel Wall Shelves
Stainless steel wall shelves sized from stored load, shelf depth and wall substrate, leavi...
View product
E Series Display Refrigerator Range
E Series display refrigerators in direct and air cooling, e.g. EDTR24-1G single door, 380 ...
View product
Commercial Meat Slicer-FP-HB-350400
HB-350 and HB-400 commercial meat slicers: 363 mm or 385 mm blades, 0.2–20 mm slices, 380V...
View product
HDW8000L Steam-Heated Commercial Dishwasher
HDW8000L steam-heated commercial dishwasher, catalogue rating 8000 plates/hour, for contin...
View product
Two-Compartment Commercial Sinks
Two compartment commercial sinks: define each bowl's job, measure internal bowls and ...
View product
E234-BCW02-11 Horizontal Banquet Cart
E234-BCW02-11 horizontal heated banquet cart: 234 L, 4 layers, 10–80C, 2.2 kW at 220 V, 10...
View product
700-Series Combined Western Kitchen Stove
700-Series combined western kitchen stove, CK-BERTO, in AISI 304 for electric 380V/3P, LPG...
View product
Commercial Meat Mixers
Choose a commercial meat mixer by recipe, meat temperature, inclusion ratio and mixing tim...
View product
Commercial Ovens for Professional Kitchens
Commercial ovens for professional kitchens chosen by tray format, cooking process, batch r...
View product
Stainless Steel Kitchen Trolleys
Stainless steel kitchen trolleys configured for payload, GN pan or tray format, travel rou...
View product
HP Countertop Gas Pasta Cooker Range
HP countertop gas pasta cookers: HP6035G (350 mm, 5.5 kW) and HP6060G (600 mm, 11.0 kW). M...
View productQ and S Series Direct-Cooling Display Cabinet Range
Q and S Series direct-cooling display cabinets, e.g. QDTR24-1G single door, 370 L, 2–8C, R...
View product
Commercial Steak & Beef Dry-Aging Cabinet with Himalayan Salt Brick & UV Sterilization
HSYL-SN-01 steak and beef dry-aging cabinet with Himalayan salt brick, UV sterilization an...
View product
HDW260-EL-R Electric-Heated Commercial Dishwasher
HDW260-EL-R electric-heated rack dishwasher: 260 racks/hour, 500 x 500 mm racks, 2632 x 81...
View product
Commercial Induction Stockpot Soup Stove
1, 2 or 3-burner induction stockpot soup stove with 400400mm tempered glass top. Zero idle...
View product
Frost-Free 3D Fan-Cooled 2/4/6-Door Upright Commercial Chiller & Freezer
Frost-free fan-cooled upright commercial chiller and freezer in 2, 4 and 6-door sizes (380...
View product
Commercial Stainless Steel Roast Duck & Cantonese Char Siu Air-Drying Chiller Cabinet
HSYL-ZS-LY stainless air-drying chiller cabinet for roast duck and char siu: 5–15C with 50...
View product
Multi-Door Independent Compartment Commercial Electric Steamer
Multi-door commercial electric steamer with independent per-compartment temperature contro...
View productFrequently Asked Questions
Does a larger appliance always increase useful output?
No. Preparation, loading, unloading and the following stage can limit the process. Additional capacity is useful when the surrounding operation can use it.
Plan the Equipment Around Your Kitchen.
Share your menu, peak service demand, available space and site utilities. Tell us which equipment you are considering so we can review the requirements with you.